(TN-360, TN 360, TN-330) Compatible High Yield Black Toner Cartridge for Brother DCP-7030, DCP-7040, HL-2140, HL-2170W, MFC-7340, MFC-7345N, MFC-7440N, MFC-7840W Printer Brother TN360 is a very popular ink toner cartridge by Merax. There are many offices are using printers that are compatible with Brother TN360. Below is the list of printers that are compatible with TN360: • • • • • • • • • • • • • • If you need ink toner for any of the Brother printers above, just click the link and it will take you to the correct page. How To Reset Brother TN360 Toner: The following is a step by step instruction on how to reset and install a new Brother TN360 Toner Cartridges: To replace new toner cartridge, please remove old cartridge from the drum unit before installing new toner cartridge.

Brother – TN110/TN115 Resetting the counter (Reset Gear) Using the illustration below as a guide, remove the 2 screws. Once the gear is resetted, re-install the. Amazon.com: 1 X Reset Gear KIT (3 pcs) Brother TN-450 TN450 (TN-420, TN420) for Starter Cartridge: Office Products. The gear is a reset gear. Without the gear installed, the printer won't reset the toner supply. The stater cartridge comes without that gear to discourage refilling. Acca Lsbf Video Lectures. Equipment Calibration Log Template.

Toner sensor needs to be reset. Please do the following steps to reset the toner sensor. Open the front cover and leave open while completing the following steps. Turn the printer off. Hold the ‘go’ button (or “start’ button) while turning the printer on.

Microsoft Word Palatino Font. All panel lights should be on. Release the ‘go’ button (or “start’ button).

Press the ‘go’ button (or “start’ button) 2 times. Press the ‘go’ button (or “start’ button) 5 times. The toner light should be off. The paper light should be on or flashing.

The ready light should be the only light on. If printer pops up errors, please check the gear of cartridge to see if it’s in the right place. If it’s in wrong position, please use fingers to turn the gear anti-clockwise with 45 angles and this will be able to reset and put back to the printer for use. Please note the following photos and make sure you installed the toner at the correct position. If the Toner LED is on: Check to see if the drum unit assembly is installed correctly. If not, take the drum unit out of the machine and put it back in. If the drum unit assembly is correctly installed, and still the Toner LED is on, the toner cartridge is empty.

Replace the toner cartridge with a new one. To replace new toner cartridge, please remove old cartridge from the drum unit before installing new toner cartridge.

Note: Brother TN360 Toner Cartridge Reset Tips and Refill Tricks Video From Youtube Video #1. Brother HL2140 TN360 TN2120 Toner Cartridge Remanufacturing and Reset Instructions.